OMT Cold Room can storage variety of foods with the temperature available from 5 degrees Celsius to minus 35 degrees Celsius as polyurethane are applied on the panel edge of the joint parts of each sandwich panel to ensure perfect sealing to avoid the cooling air leakage from the cool room.
OMT 24ton Cold Room Technical Parameter:
12HP, Bock/Bitzer, Germany
Colorbond painted steel or Stainless Steel 304
50MM; 100MM; 150MM;
Hinged Type or Sliding Type
380V, 50Hz, 3P
OMT Cold Room Features:
1. Concavo convex structure
Panels are joined together by means of tongue and groove and locked together by cam-lock on each side
of the panel to ensure air tight joints. There’s no need of rivets, thus reduce the cost and save the time.
2. Easier and faster installation, can be expanded or removed conveniently.
3. Perfect heat insulation
High density thermo insulated PUR foam up to 42kg/m3 for perfect cold room heat insulation efficiency.
4. Low flammable
Low flammable PUR foam is used in the cold room panel, with fire retardant B2 grade.
5. Highly hermetical
Silica gel are used on the panel edge of the joint parts of each sandwich panel to ensure perfect sealing to
avoid the cooling air leakage from the cool room or moisture inside the PU insulated panel for the best
refrigeration and frozen storage result.
6. Load bearing
The compressive strength is 150kpa or more, people can walk on the floor panels and allow trolleys to go
in or out.