OMT Cold rooms can be termed as large size walk-in coolers for short term storage of perishables like fruits,vegetables, meat and fish, dairy products or special products like medicines, chemicals etc.

OMT 12ton Commercial Cold Room Technical Parameter:
 

OMT Commercial Cold Room Features:

1. Concavo convex structure
Panels are joined together by means of tongue and groove and locked together by cam- lock on each side 
of the panel to ensure air tight joints. There’s no need of rivets, thus reduce the cost and save the time.

2. Easier and faster installation,can be expanded or removed conveniently.

3. Perfect heat insulation
High density thermo insulated PUR foam up to 42kg/m3 for perfect cold-room heat insulation efficiency.

4. Low flammable
Low flammable PUR foam is used in the cold room panel, with fire retardant B2 grade.

5. Highly hermetical
Silica gel are used on the panel edge of the joint parts of each sandwich panel to ensure perfect sealing to 
avoid the cooling air leakage from the cool room or moisture inside the PU insulated panel for the best 
refrigeration and frozen storage result.
 
6. Load bearing
The compressive strength is 150kpa or more, people can walk on the floor panels and allow trolleys can go 
in and out.
 

OMT 12ton Commercial Cold Room Pictures :

Cold Room Front View	Machine Unit Outside the Cold Room
Cooling Fan	Cooling Fan in the Cold Room
Cold Room Insulated Panel
Insulated Panel Shipment

OMT Commercial Cold Room Series

⊙Temparature:  for keeping fresh: 5℃~-5℃;
                              for keeping chiller: -5℃~-15℃;
                              for keeping freezer: -15℃~-25℃;
                              for blast freezer; -30℃~-40℃;
⊙Supply Power: 380~420V, 50Hz, 3Phase; 220V, 60Hz, 3Phase; 380V, 60Hz, 3Phase; 440V, 60Hz, 3Phase;
⊙Working Conditions: Input Water Temp: 21℃; Ambient Temp: 25℃; Evaporator Temp: -20℃; Condensing Temp: 40℃;
⊙Model and specifications can be subject to change without notice.

Machine Configuration List: